LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 50725501 Replacing Longitudinal Member For Wheel Housing Upper Section >> Removing Longitudinal Member For Inner Wheel Housing Upper Section

Removing Longitudinal Member For Inner Wheel Housing Upper Section

  1. Loosen longitudinal member for inner wheel housing upper section.
    G14405426Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

    1. 1.1. Remove punch rivets -A-  using >VAS 852 001 - dent removal unit  and >VAS 6790 - Compact Booster  .

      > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    2. 1.2 Drill through punch rivets -B-  from the inside.
  2. Remove punch rivets using >VAS 852 001 - body dent removal system, aluminum  and >VAS 6790 - Compact Booster  .

    > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14405427Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  3. Heat bonding areas using >V.A.G 1416 - hot-air blower  .
    G14405428Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  4. Heat bonding areas using >V.A.G 1416 - hot-air blower  .
    G14405429Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas