LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 50725501 Replacing Longitudinal Member For Wheel Housing Upper Section >> Preparing Filler Plate For Installation

Preparing Filler Plate For Installation

  1. Fit in filler plate and secure to the body.
  2. Drill bore hole for blind rivets -A-  , -B-  and -C-  through both sheetmetal plates with >diameter 6.6 mm  .
    G14405461Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Filler plate

  3. Remove filler plate.
  4. Prepare closing element for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14405462Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Filler plate bonding areas

scientia non olet · About LEMON Manuals