LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 505619 Removing And Installing Front Wheel Housing Liner >> Installing Front Wheel Housing Liner

Installing Front Wheel Housing Liner

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws at the bottom to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten screws at the bottom to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten screws at the bottom to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten screws at the top to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten side screws to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

    Tighten nuts to >Tightening torque 2.5 (1.75 ftlb.) Nm  .

scientia non olet · About LEMON Manuals