Removing Front Wing

Information 

Handling high-voltage lines: 

• Do not support yourself or your tools on high-voltage lines and their components. 
• Work involving metal-removing, deforming and sharp-edged tools close to high-voltage components and lines is prohibited. 
• Work involving heat sources such as welding, soldering, hot air and thermal bonding close to high-voltage components and lines is prohibited. 
• High-voltage lines must not be extensively bent or kinked. 
• A visual inspection of the high-voltage connectors must be performed before installing the high-voltage lines. If there are signs of damage to the connectors, contacts and seals, the high-voltage line must be replaced. 
• In the event of queries or uncertainties, consult the relevant high voltage technician. 

Information 

The front lid must be closed in order to reach the screw at the very back.

1. Remove wing trim panel -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wing trim panel

   1. 1.1. Unclip pull knob -1-  (-arrow-  ).
   2. 1.2. Unscrew screws -3-  .
   3. 1.3. Remove wing trim panel -2-  and feed out pull knob -1-  .
2. Unscrew screw -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Screw

3. Disconnect electric power supply flap (module) -1-  with charging socket.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Nuts

   1. 3.1. Release and disconnect electric plug connection -3-  .
   2. 3.2. Unscrew nuts -2-  .
4. Swivel out electric power supply flap (module) -1-  with charging socket and secure it -arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Electric power supply flap (module)

5. Unclip cover on hinge -1-  and remove it by pulling it inwards -arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover on hinge

6. Unscrew screws -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Front wing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Wing

7. Unscrew screw -1-  and remove air guide -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Air guide

8. Unclip cover on front wing -1-  and remove it.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover on front wing

9. Unscrew screws -1-  and remove retaining strips for side skirts -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Retaining strip for side skirts

10. Unscrew screws -1-  .

    Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front wing

11. Unscrew screw -1-  .

    Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw

12. Guide out and remove front wing.