LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 505355 Replacing Wing Joining Plate >> Removing Front Wing Joining Plate >> Removing front wing connection panel

Removing front wing connection panel

Information 

Only drill through one plate thickness on the spotwelds. Do not damage the component underneath.

  1. Drill out spotwelds.
    G14405319Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Spotwelds

  2. Remove front wing connection panel.
scientia non olet · About LEMON Manuals