LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 505355 Replacing Wing Joining Plate >> Preparing Rear Wing Joining Plate For Installation

Preparing Rear Wing Joining Plate For Installation

  1. Fit in rear wing joining plate on the body, check that it fits perfectly and remove it.
  2. Prepare marked area for bonding.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14405332Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

scientia non olet · About LEMON Manuals