LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 505355 Replacing Wing Joining Plate >> Preparing Connection Areas Of The Body For Installation

Preparing Connection Areas Of The Body For Installation

  1. De-burr contact surfaces and connection points.
  2. Prepare marked area for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14405322Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area



  1. Carefully reshape the protruding areas of the penetrated joints using a hammer from the >V.A.G 2010/2A - Aluminum tool set  so that a flat contact surface is formed.
    G14405330Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Contact surface

  2. Prepare marked area for bonding.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14405331Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

scientia non olet · About LEMON Manuals