LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Collision >> Body Panels >> 50 - Body Rear >> WM, 503819 Removing And Installing Lock Carrier >> Installing Lock Carrier

Installing Lock Carrier

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws to >Tightening torque 8 (6 ftlb.) Nm  .

    Tighten screws to >Tightening torque 20 (15 ftlb.) Nm  .

    Tighten screws to >Tightening torque 5.5 (4 ftlb.) Nm  .

    Tighten screw to >Tightening torque 9 (6.5 ftlb.) Nm  .

    Tighten screw to >Tightening torque 9 (6.5 ftlb.) Nm  .

scientia non olet · About LEMON Manuals