LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers >> WM, 635719 Removing And Installing Rear Retaining Strip >> Installing Rear Retaining Strip >> Installing rear retaining strip at the centre and rear retaining strip for tail light

Installing rear retaining strip at the centre and rear retaining strip for tail light

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten nut securing rear retaining strip at the centre to rear end section to >Tightening torque 6 (4.5 ftlb.) Nm  .

    Tighten nut securing rear retaining strip for tail light to corner piece in luggage compartment to >Tightening torque 6 (4.5 ftlb.) Nm  .

scientia non olet · About LEMON Manuals