LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers >> WM, 635519 Removing And Installing Rear Apron >> Installing Rear Apron

Installing Rear Apron

  1. Installation is performed in reverse order. Pay particular attention to the following:

    The seal on the lid must be positioned correctly.

    Tighten screw at the top to >Tightening torque 6 (4.5 ftlb.) Nm  .

    Tighten screws to >Tightening torque 2.8 (2 ftlb.) Nm  .

    Tighten screws on guide pins to >Tightening torque 6 (4.5 ftlb.) Nm  .

scientia non olet · About LEMON Manuals