Installing Front Apron

Installation is performed in reverse order. Pay particular attention to the following:
Slide front apron sideways into the stop -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Y stop

Tighten screw to >Tightening torque 2.8 (2 ftlb.) Nm .

Tighten screws to >Tightening torque 5.5 (4 ftlb.) Nm .

Tighten screws to >Tightening torque 2.5 (1.75 ftlb.) Nm .

Tighten screws to >Tightening torque 5.5 (4 ftlb.) Nm .

Tighten screws to >Tightening torque 2.5 (1.75 ftlb.) Nm .