No Identifiable Deformations On The Body Structure

1. Check seam joining line on the accessories

   > 5000IN DIAGRAM - BODY GAP DIMENSIONS 

2. Check accessories for paint abrasion (accessories that were hit during impact)
3. Drive the vehicle onto a lifting platform and raise it. Measure screw points using an electronic measuring system (e.g. > VAS 6526/11 - Measuring Unit, Professional  or > VAS 811 019 - Measuring system  ) and compare with the required values.
4. Determine extent of any apparent damage to vehicle parts

   Measure running gear electronically if necessary

   > *** 449503 Suspension alignment complete

5. Decide whether the vehicle has to be repaired

Repair vehicle, if necessary.