Loosening Friction Element Welded Joints (Standard Friction Element)

Information 

The following description is intended only as a guide. A description of the steps involved and the various areas of application can be found in the operating instructions provided with the respective device.

Information 

The support fixture to be used and the required gas pipe will vary depending on the type of bolt to be welded. See operating instructions provided with the device for details of the correct pairing.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Standard friction element

1. Remove paint and oxide coating on friction element.
2. Weld the weld stud > WELDING BOLT 999.516.032.01  onto the friction element.

>5X00IN11 STUD WELDING 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding on weld stud