LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 5X - Body General >> WM, 5X00IN11 Stud Welding >> Working With Body Structural Foam >> Processing Conditions

Processing Conditions

During processing, the ambient and material temperature must be at least > Minimum temperature 15 °C  and must not exceed a maximum temperature of > Maximum temperature 28 °C  .

Higher processing temperatures reduce processing time.

> Processing time at 20 °C 90 min 

> Processing time at 28 °C 60 min 

scientia non olet · About LEMON Manuals