Installation Position
Add-on parts
PART DESCRIPTION
| A | Aluminium sheet |
| B | Cast aluminium |
| C | Extruded aluminium profiles |
| D | Steel; for details, see |
>5X00IN04 BODY PARTS OF VARIOUS SHEET-STEEL STRENGTHS
Upper structural parts
PART DESCRIPTION
| A | Aluminium sheet |
| B | Cast aluminium |
| C | Extruded aluminium profiles |
| D | Steel; for details, see |
>5X00IN04 BODY PARTS OF VARIOUS SHEET-STEEL STRENGTHS
Lower structural parts
PART DESCRIPTION
| A | Aluminium sheet |
| B | Cast aluminium |
| C | Extruded aluminium profiles |
| D | Steel; for details, see |
>5X00IN04 BODY PARTS OF VARIOUS SHEET-STEEL STRENGTHS
MATERIAL SPECIFICATION
| Item | Material group | Use/Characteristics |
|---|---|---|
| A | Aluminium sheet | Outer skin parts very malleable Section replacement as per Workshop Service Information Reinforcement parts very malleable Section replacement as per Workshop Service Information Must not be reshaped using mechanical or hydraulic pulling or pressing equipment |
| B | Cast aluminium | Reinforcement parts Section replacement is not permitted Must not be reshaped |
| C | Extruded aluminium profile | Reinforcement parts not very malleable Section replacement as per Workshop Service Information Must not be reshaped using mechanical or hydraulic pulling or pressing equipment |