Removing Rear Lock Upper Part

WARNING: Moving components

Danger of limbs being trapped or severed
- Do not reach into the danger area.
- Secure the system to prevent it from being activated accidentally.
- Keep third parties away from the danger area.

Information

When removing the upper part of the lock using a closing aid, first disconnect the plug connection for the power supply.
This prevents the closing aid motor from starting up while you are disconnecting the plug connection/control system.

Release and unplug electric plug connection -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection
Unscrew screws -1- and remove upper part of rear lock -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws on upper part of lock
Unclip wire cable -4- at the holder -5- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unclipping wire cable
1. 3.1 Disengage wire cable -4- from rear lock upper part -2- .
Remove foam cap -1- until the electric plug connection is accessible.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Foam cap
Open foam cap -1- , release electric plug connection -2- and remove closing aid -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Foam cap