Emergency Release - Rear

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cover for lock

1. 1.1 Detach trim panel in the area -3-  .
2. 1.2 Mark centre point of bore.>Length 30 mm  >Length 20 mm 

   Information 

   Drill carefully; components lying behind it, such as cables, can be damaged.

   Information 

   This action will damage the component.

   Replace component.

3. 1.3. Also drill through lock cover -2-  with >Length 12 mm  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Lock

1. 2.1 Insert screwdriver into the bore hole -1-  . -arrow A- 
2. 2.2. Probe the release -2-  with a screwdriver and engage the screwdriver.
3. 2.3. Actuate release -2-  with the screwdriver in direction -arrow B-  .

   Lock unlocks audibly.