Installing Front Lid Seal

Information 

• The gap in the seal must be centred at the bottom. 
• The rear lid seal must be fitted by hand. 
• Pay particular attention to correct fitting in the areas near the tight radii; there must be no deformation or stretching. 
• Check the air vents; they must not be closed or covered. 

1. Place front lid seal -1-  in installation position.-arrow-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Front lid seal

2. Press front lid seal -1-  onto the body -Arrows-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Front lid seal

3. Press on front lid seal at the rounded areas using >*** 9513 - puller.