Installing Front Wing

Installation is performed in reverse order. Pay particular attention to the following:

1. Tighten screws to >Tightening torque 8 (6 ftlb.) Nm  .
2. Tighten screw to >Tightening torque 8 (6 ftlb.) Nm  .
3. Tighten screw to >Tightening torque 8 (6 ftlb.) Nm  .
4. Tighten screws to >Tightening torque 8 (6 ftlb.) Nm  .
5. Tighten screws to >Tightening torque 2.8 (2 ftlb.) Nm  .
6. Tighten screws to >Tightening torque 2.8 (2 ftlb.) Nm  .
7. Tighten screw to >Tightening torque 4.5 (3.25 ftlb.) Nm  .
8. Tighten nuts to >Tightening torque 8 (6 ftlb.) Nm  .