LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 50 - Body Rear >> WM, 505355 Replacing Wing Joining Plate >> Preparing Front Wing Joining Plate For Installation

Preparing Front Wing Joining Plate For Installation

  1. Fit front wing joining plate on the body using the front wing, check that it fits perfectly and mark the position.
  2. Drill bores for blind rivets through both sheet metal panels using >diameter 6.6 mm  .
    G14405320Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bore holes

  3. Prepare marked area for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14405321Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area

scientia non olet · About LEMON Manuals