LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Taycan 4S >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> 50 - Body Rear >> WM, 504155 Replacing Support >> Removing Support

Removing Support

  1. Loosen support.
    G14405266Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Support

    1. 1.1. Unscrew self-tapping screws -1-  .

      > 5X00IN24 SETTING SELF-TAPPING SCREWS

    2. 1.2. Remove punch rivets using >VAS 852 001 - Body Dent Removal System, Aluminum  and >VAS 6790 - Compact Booster  .

      > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

  2. Heat bonding areas using >V.A.G 1416 - Hot-Air Blower  .
    G14405267Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  3. Remove support.
scientia non olet · About LEMON Manuals