Installing Led Light Bulb (Matrix Module)

Information 

Only touch the lamp (Matrix module) with clean cotton gloves.

Only touch the lamp (Matrix module) on the cooler housing. Do not touch the lens.

The lens must be clean and free of grease.

Do not clean the lens with a cleaning agent.

1. Install in reverse order. Pay particular attention to the following:

   Tighten screws with > Tightening torque 1.3 Nm (1 ftlb.). 

   Tighten screws with > Tightening torque 0.8 Nm (0.5 ftlb.). 

   Electrical connectors must engage perceptibly.