Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Steering wheel to steering column | Internal serration screw, M18 x 1.5 x 26, always replace following removal! (micro-encapsulated thread) | Initial tightening | 30 Nm (22 ftlb.) | ||
| Steering wheel to steering column | Internal serration screw, M18 x 1.5 x 26, always replace following removal! (Micro-encapsulated thread) | Final tightening torque angle | + 90° |