LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 86 (26 Exhaust System 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 261219 Removing And Installing Heat Shield For Turbocharger (V6 Turbo) >> Installing Heat Shield For Turbocharger

Installing Heat Shield For Turbocharger

WARNING: This page is about a different variant/trim than selected.
  1. Install heat shield for turbocharger.
    1. 1.1 Tighten screws to > Tightening torque 9 Nm (6.5 ftlb.)  .
    2. 1.2 Tighten ball pin to > Tightening torque 4.8 Nm (3.5 ftlb.)  .
scientia non olet · About LEMON Manuals