LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 64 (70 Linings, Insulation - Wagon -- 971 - PANAMERA (971)) >> WM, 705819 Removing And Installing Dashboard Moulding On Driver's Side >> Installing Dashboard Moulding On Driver's Side

Installing Dashboard Moulding On Driver's Side

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws for instrument cluster trim panel: > Tightening torque 1.5 Nm (1 ftlb.) 

    Tightening torque for screws for dashboard moulding on driver's side: > Tightening torque 1.5 Nm (1 ftlb.) 

scientia non olet · About LEMON Manuals