LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (24 Fuel System - Electronic Injection 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 249019 Removing And Installing Fuel Line (High-Pressure, Right) (V6 Turbo) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install torque support bracket.
    1. 1.1 Move torque support bracket -1-  into installation position and fit screws -2-  and -3-  .
      G15876941Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Torque support bracket

    2. 1.2 Tighten screw -2-  > Tightening torque 23 Nm (17 ftlb.) 
    3. 1.3 Tighten screw -3-  > Tightening torque 55 Nm (40.6 ftlb.) 
  2. Secure torque support to bracket or strut.

    > 103719 REMOVING AND INSTALLING TORQUE SUPPORT

  3. Check the fuel system for leaks.
  4. Install engine cover (design cover).

    > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

  5. Install strut.

    > WM, 408619 REMOVING AND INSTALLING STRUT (A-STRUT)

scientia non olet · About LEMON Manuals