Preliminary Work

1. Switch off ignition and remove ignition key.
2. Remove strut.

   > WM, 408619 REMOVING AND INSTALLING STRUT (A-STRUT)

3. Remove engine cover (design cover).

   > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

4. Loosen torque support at the bracket and swivel it upwards.

   > 103719 REMOVING AND INSTALLING TORQUE SUPPORT

5. Remove torque support bracket.
   1. 5.1 Unscrew screws -2-  and -3-  and loosen and guide out bracket for torque support -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Torque support bracket