Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Fastening screw securing holder to catalytic converter | M8 x 20 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw securing holder on bank 2 to transmission | Tightening torque | 23 Nm (17 ftlb.) | |||
| Screw for connection point for ATF lines/transmission | M8 x 20 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screw for ATF lines/transmission | M6 x 12 | Tightening torque | 8 Nm (6 ftlb.) |