Porsche Doppelkupplung (Pdk) On Engine (Hybrid)

WARNING: This page is about a different variant/trim than selected.

Fig 1: Porsche Doppelkupplung On Engine Components Location With Torque Specification (Hybrid)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Porsche Doppelkupplung (PDK) on engine (Hybrid)

1	Screw securing Porsche Doppelkupplung (PDK) to engine > Initial tightening 20 Nm (15 ftlb.) > Torque angle 60 (44 ftlb.) °
2	Screw securing Porsche Doppelkupplung (PDK) to engine > Initial tightening 15 Nm (11 ftlb.) > Torque angle 105°
3	Catalytic converter holder