Belt Drive - Hybrid

WARNING: This page is about a different variant/trim than selected.

Component overview:

Fig 1: Belt Drive On Hybrid Vehicles Components Location With Torque Specification

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Component overview of belt drive on Hybrid vehicles

1	Drive belt
2	Vibration damper screw - replace screw! > Initial tightening 150 Nm (111 ftlb.) > Final tightening
torque	angle 90 Grad
3	Vibration damper
4	Screw for tensioning roller > Tightening torque 40 Nm (30 ftlb.)
5	Belt tensioner
6	Tensioning roller (fitted on belt tensioner)
7	Screw on tensioning roller
8	Belt tensioner holder
9	Coolant pump pulley
not shown	Screws for belt tensioner holder - replace screws! > Initial tightening 8 Nm (6 ftlb.) > Final tightening torque angle 45 Grad