LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (38 Automatic Transmission Gears Control 3.0L Turbo -- 971 - PANAMERA (971)) >> WM, 386219 Removing And Installing ATF Cooling Line (Front Section) >> Installing ATF Cooling Line (Front Section)

Installing ATF Cooling Line (Front Section)

WARNING: This page is about a different variant/trim than selected.

Information 

Replace sealing ring.

Coat sealing rings with ATF.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tightening torque for screw securing ATF cooling line (front section) to thermostat: > Tightening torque 8 Nm (6 ftlb.) 

scientia non olet · About LEMON Manuals