Removing Pressure Sensor

Information 

• The sealing ring on the pressure sensor is pressed on. 
• After removing a pressure sensor, the sensor must be replaced. 

Information 

• The pressure sensors can be diagnosed. As a result, a faulty pressure sensor can be detected in the PIWIS Tester. 

  Installation overview of pressure sensor (K3, all-wheel drive vehicles only): 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of pressure sensor

1. Remove pressure sensor -1-  .
   1. 1.1 Release and pull off cable plug -2-  .
   2. 1.2 Loosen pressure sensor -1-  and unscrew it by hand.

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Pressure sensor in hydraulic space