Install Front Side Airbag
WARNING: This page is about a different variant/trim than selected.
WARNING:
Incorrect handling of safety bolts
- Danger of injury
- Loss of torque
→ Always use new screws or nuts following removal.
→ Comply with instructions for repairs.
→ Observe specified tightening torques.
→ Carry out a visual inspection of parts used.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in and tighten screw securing front side airbag to seat frame > Tightening torque 9.7 Nm (7.2 ftlb.)
Screw in and tighten screws for trim panel over side airbag > Tightening torque 5.6 Nm (4.1 ftlb.) +/- 0.2 Nm (0.1 ftlb.)