Preliminary Work

1. Remove engine cover.

   > WM, 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER) (V6 TURBO)

2. Loosen front apron.

   > 631519 REMOVING AND INSTALLING FRONT APRON

   1. 2.1 Unscrew screws -3-  .

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Unscrewing front screw at the top

   2. 2.2 Pull safety clips -2-  at the left and right off the guide pins using > T10118 - assembly tool  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pulling off safety clips

3. Unscrew screws -1-  using > VAS 6928 - Socket wrench set, 39-piece  and remove reinforcement.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing reinforcement