Removing Front Centre Loudspeaker (Dashboard)
NOTE:
Voltage peaks
- Risk of damage to electrical load or to the control unit
→ Remove the ignition key and switch off load before disconnecting or removing load.
- Unscrew screws -4-
using a suitable change-over ratchet.
Unscrewing screws
- Remove front loudspeaker (in dashboard) at the centre -6-
.
Removing front centre loudspeaker (dashboard)
- 2.1 Loosen front loudspeaker (in dashboard) at the centre -6- until the electric plug connection -5- is accessible.
- 2.2 Release and unplug electric plug connection -5- .
- 2.3 Remove front loudspeaker (in dashboard) at the centre -6- .
- Also on vehicles with Burmester High-End sound system (I-no. 9VJ):
Remove front loudspeaker (in dashboard) at the centre -9- .
- 3.1 Unscrew and remove screw -8- .
- 3.2 Loosen screws -7-
until the front loudspeaker (in dashboard) at the centre -9-
can be pulled out.
Loosening front loudspeaker (in dashboard) at the centre
- 3.3 Pull out front loudspeaker (in dashboard) at the centre until the electric plug connection -10- is accessible.
- 3.4 Release and unplug electric plug connection -10- .
Removing front centre loudspeaker (dashboard)
- Remove front loudspeaker (in dashboard) at the centre.