LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> 82 Auxiliary Heating - Coupe -- 971 - PANAMERA (971) >> WM, 822219 Removing And Installing Heater Holder >> Installing Heater Holder

Installing Heater Holder

  1. Position rubber buffer -2-  of heater holder -1-  in the guide -3-  .
    G15874845Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Positioning rubber buffer

  2. The remaining installation steps are performed in reverse order. Pay particular attention to the following:

    Tightening torque for screws securing heater to holder: > Tightening torque 20 Nm (14.75 ftlb.) 

scientia non olet · About LEMON Manuals