Removing Glove Compartment Lock
WARNING: This page is about a different variant/trim than selected.
NOTE:
Lock cylinder removed and installed incorrectly
- Loss of small parts
- Risk of damage to lock cylinder
→ Remove and install lock cylinder only with the key inserted.
- Lift the handle -arrow-
.
Lifting handle
Information
The rubber stop on the handle can loosen or fall out when removing the safety clip.
Fit rubber stop again correctly.
- Remove safety clip -2-
from lock -1-
.
- 2.1 > 3438 - Hook -3- must now be guided into the groove on the handle -arrow A- .
- 2.2 Remove safety clip -2- completely -arrow B- .
Removing safety clip
- Remove lock.
Removing lock