Removing Solenoid Hydraulic Valve For Valve Lift Adjustment (Cylinder 8)

Only for intake side of cylinder 8: 

1. Lift up moulded part -3-  .
   1. 1.1 Release and disconnect electric push-on connector -1-  for ignition coil.
   2. 1.2 Release and disconnect electric push-on connector -2-  for solenoid hydraulic valve for valve lift adjustment.
   3. 1.3 Lift up moulded part -3-  for easier access to the solenoid hydraulic valve for valve lift adjustment.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Intake side of cylinder 8

2. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Solenoid hydraulic valve for valve lift adjustment

   Only for outlet side of cylinder 8: 

3. Lift up moulded part -3-  .
   1. 3.1 Unclip electric push-on connector -1-  from retaining clip and set it aside.
   2. 3.2 Release and disconnect electric push-on connector for solenoid hydraulic valve for valve lift adjustment -2-  .
   3. 3.3 Lift up moulded part -3-  for easier access to the solenoid hydraulic valve for valve lift adjustment.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Outlet side of cylinder 8

4. Unscrew fastening screws -1-  and remove solenoid hydraulic valve for valve lift adjustment -2-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Solenoid hydraulic valve for valve lift adjustment