LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (19 - Engine - Cooling 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 194519 Removing And Installing Additional Coolant Pump (Run-On) (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install heat shield (on bottom half) of catalytic converter.

    > 261219 REMOVE AND INSTALL HEAT SHIELD ON CATALYTIC CONVERTER (V8 BITURBO)

  2. Install primary catalytic converters together with catalytic converters

    > 267619 REMOVE AND INSTALLING PRIMARY CATALYTIC CONVERTER (V8 BITURBO)

    > 267319 REMOVE AND INSTALL CATALYTIC CONVERTER (V8)

  3. Install shields (on top half) of catalytic converter.

    > 261219 REMOVE AND INSTALL HEAT SHIELD ON CATALYTIC CONVERTER (V8 BITURBO)

  4. Fill in coolant

    > WM, 193817 DRAINING AND FILLING COOLANT