LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (19 - Engine - Cooling 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 194319 Removing And Installing Bleed Tube >> Install Breather Pipe >> Installing Bleed Tube

Installing Bleed Tube

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order, paying attention to the following:

    Tighten screws > Tightening torque 9 Nm (6.6 ftlb.)