Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Holder on bank 1 to transmission | Tightening torque | 23 Nm (17 ftlb.) | |||
| Screws for heat shield/transmission | M6 x 12 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Screws for vibration balancer/transmission | M8 x 40 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screws for transmission mount/transmission | M8 x 35 | Tightening torque | 20 Nm (15 ftlb.) |