Removing Front Door Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of front door panel

1. Disconnect wire harness from front door panel.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnecting connector

   1. 1.1 Release plug connection -a-  , swivel the locking mechanism down -b-  and disconnect plug connection -A-  .
   2. 1.2 Release plug connection -c-  and disconnect plug connection -B-  .
2. Unclip trim -1-  using a plastic wedge.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unclipping trim

3. Unclip trim -1-  using a plastic wedge.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Cover

4. Unscrew fastening screws -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fastening screws for front door panel

5. Unclip fixing clips -1-  for front door panel -2-  using a plastic wedge.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fixing clips for front door panel

6. Disengaging cable for door opener.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disengaging cable for door opener

   1. 6.1 Spread locking lugs outwards. -Arrow A- 
   2. 6.2 Move cable for door opener -1-  to the rear and out of the guide. -Arrow B- 
   3. 6.3 Swivel cable for door opener -1-  in direction of arrow until the driver at the front is free -Arrow C-  .
   4. 6.4 Remove cable for door opener -Arrow D-  .
7. Remove front door panel -Arrow-  .