Vacuum System
WARNING: This page is about a different variant/trim than selected.
Front view:
View of line routing for vacuum system - front
| 1 | Control valve |
| 2 | Retaining clips |
| 3 | Vacuum hoses to the vacuum modulators |
| 4 | Vacuum pump connection |
| 5 | Control valve connection |
View of right side:
Line routing for vacuum system - right side
| 1 | Vacuum hose connections |
| 2 | Retaining clips |
| 3 | Vacuum hose connections |
| 4 | Dummy plug |
View of left side:
Line routing for vacuum lines - left
| 1 | Vacuum hose connections |
| 2 | Dummy plug |
| 3 | Retaining clips |
| 4 | Control valve |
> Tightening torque 9 Nm (6.6 ftlb.)
> Tightening torque 4 Nm (3 ftlb.)