LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (27 Starter, Power Supply, Cruise Control 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 270519 Removing And Installing Battery Sensor >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance Tolerance
Left and right boot pan cover screws Item 2 Tightening torque 1.5 Nm (1.1 ftlb.)    
G15878208Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screws for luggage compartment
cover        
Nut for battery ground terminal   Tightening torque 3.5 Nm (2.5 ftlb.)    
Cap nut securing ground line/battery sensor to body   Tightening torque 15 Nm (11 ftlb.)    


Location Description Type Basic value Tolerance Tolerance
Fastening nut securing positive cable to body -1- Tightening torque 10 Nm (7.5 ftlb.)    
G15878213Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing battery sensor
         
Terminal clamp to battery -1-, -2- Tightening torque 6 Nm (4.5 ftlb.)    
G15878214Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Attaching terminal clamps
         
external current supply charging device current 90 A