Activating Parking Lock (Removing Release Screw)

Information 

• The  > 9910 - release screw is an aid that allows you to roll the vehicle when the battery is flat. 
• The release screw is installed during production up to calendar week 11/2018. The release screw must be removed before handing a new vehicle over to the customer. 
• The release screw must not be left in the customer vehicle. 

1. To activate the parking lock -2-  , unscrew and remove > 9910 - release screw-1-  .

   The electric parking lock is activated.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Activating parking lock

2. Read out and erase fault memory.