Removing Servo Motor For Front Left Temperature Valves

NOTIFICATION 

Voltage peaks 

• Risk of damage to electrical load or to the control unit 

  → Remove the ignition key and switch off load before disconnecting or removing load.

1. Removing servo motor for front left temperature valves -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Servo motor for front left temperature valves

1. 1.1 Release and disconnect electric plug connection -2-  .
2. 1.2 Unscrew and remove screws -3-  .
3. 1.3 Disconnect servo motor for front left temperature valves -1-  together with holder from the heating/fresh-air unit by pulling it in -direction of arrow-  .