Removing Servo Motor For Fresh Air/Recirculated Air

NOTIFICATION 

Voltage peaks 

• Risk of damage to electrical load or to the control unit 

  → Remove the ignition key and switch off load before disconnecting or removing load.

1. Release the locking mechanisms -2-  and fresh air/recirculated air housing -1-  from the heating/fresh-air unit.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Fresh air/recirculated air housing

2. Remove servo motor for fresh air/recirculated air -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Servo motor for fresh air/recirculated air

1. 2.1 Release and disconnect electric plug connection -2-  .
2. 2.2 Unscrew and remove screws -3-  .
3. 2.3 Set down servo motor for fresh air/recirculated air -1-  .