Installing Circulating Pump For Auxiliary Heater

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for circulating pump on holder

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for coolant hoses on circulating pump

1. 2.1  Push coolant hoses -2-4-  as far as they will go over the adapters.

   Tighten spring band clamps -1-  by -3-  using > Nr.72 Pos.1 - assembly pliers  .

2. 2.2  Remove > 3094 - hose clamp  from the coolant hoses -2-  and -4-  put aside.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connector for circulating pump

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat protection mat

1. 4.1  Fit heat protection mat -1-  on the circulating pump and snap-on press-studs -Arrows-  .