Gap Dimensions - 60 - Roof Assembly
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Roof to front panel | D3 | Gap dimension | 10 mm | +/- 1.2 mm |
| Roof to front panel | D4 | Gap dimension | - 1 mm | +/- 1 mm |
|
Roof to front panel |
||||
| Front panel to rear panel | D5 | Gap dimension | 2 mm | +/- 0.5 mm |
| Front panel to rear panel | D6 | Gap dimension | 1 mm | +/- 1.2 mm |
|
Front panel to rear panel |
||||
| Rear panel to roof | D7 | Gap dimension | 10 mm | +/- 1.2 mm |
| Rear panel to roof | D8 | Gap dimension | 1 mm | +/- 1 mm |
|
Panel to rear panel |
||||