LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2020 >> Macan Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 30 (19 Engine - Cooling 3.0L -- 95B - MACAN (95B)) >> WM, 196119 Removing And Installing (Engine) Coolant Pipe (V6 Turbo) >> Subsequent Work >> Subsequent Work For Coolant Pipe On Switching Valve

Subsequent Work For Coolant Pipe On Switching Valve

WARNING: This page is about a different variant/trim than selected.
  1. Monoturbo: 

    Install pressure pipe (from turbocharger to charge air cooler).

  2. Biturbo: 

    Install right side pressure pipe from turbocharger to charge air cooler.

  3. Install belt pulley.
  4. Refill coolant.
scientia non olet · About LEMON Manuals